Basic Flat Pack Kennel

Basic Flat Pack Kennel

  • The Basic flat pack dog kennels are essentially a budget model of our Premium Flat Pack kennel, so they have front doors, but no  back doors, no dog room, are lighter built, the walls are zinc (galvanised coloured), the front half of kennel is still all mesh and the back half is all sheet metal.
  • Is available only in a 2 bay model (at this stage)
  • Freight cost is cheaper and the further it has to be freighted the cheaper freight becomes in comparison to the Standard Kennel freight cost
  • Frame is lighter than the Standard Kennel and there is less frame work than in the Premium Flat Pack Kennel
  • Hinges are just good quality butt hinges tek screwed on as opposed to the very heavy duty lift off welded hinges on the standard kennel
  • Kennel has been completely redesigned to allow for flat packing and ease of assembly by the average handyperson so doors are latched & hinged in their frames, all wall sheet metal is predrilled & good instructions with clear pictures are included along with all the screws and bolts required.



  • All doors and framework are made from 25x25 x2 galv RHS
  • Mesh is 50 x 50 x 5mm galv weldmesh
  • All steel is highest quality Australian sourced steel with the thickest coating available
  • Treated pine decking for dog run grating is 90 x 22mm
  • Zinc roofing
  • Zinc exterior walls
  • Hinges are good quality butt hinges tek screwed on


  • Bays are approximately 2.33m long x 0.9m wide x 1.1m high
  • This kennel is available in a double bay
  • Skid is 0.55m high
  • 19mm grating gap
  • Total height of assembled kennel is approximately 1.65m


Other Products

Standard Kennel

Our Standard Kennel is more robust and comes fully assembled. It is made of heavier and more steel in the framework and much heavier hinges.


Premium Flat Pack Kennel

Our Premium Flat Pack model is a raised run dog kennel made of lighter material but still of a high quality and is cheaper to transport because of it's flat pack design.